... home ...
analog: Definition and Recommended Links
Our favorite links for this topic area. Enjoy, fellow researchers! Questions, comments, new links? Email eewindow@aol.com!. Our favorite links for this topic area. Enjoy, fellow researchers! Questions, comments, new links? Email eewindow@aol.com!. An analog or analogue signal is any time continuous signal where some time varying feature of the signal is a representation of some other time varying quantity. It differs from a digital signal in that small fluctuations in the signal are meaningful. Analog is usually thought of in an electrical context; however, mechanical, pneumatic, hydraulic, and other systems may also convey analog signals.
An analog signal uses some property of the medium to convey the signal's information. For example, an aneroid barometer uses rotary position as the signal to convey pressure information. Electrically, the property most commonly used is voltage followed closely by frequency, current, and charge.
Any information may be conveyed by an analog signal; often such a signal is a measured response to changes in physical phenomena, such as sound, light, temperature, position, or pressure, and is achieved using a transducer.
For example, in sound recording, fluctuations in air pressure (that is to say, sound) strike the diaphragm of a microphone which causes corresponding fluctuations in a voltage or the current in an electric circuit. The voltage or the current is said to be an 'analog' of the sound.
Any measured analog signal must theoretically have noise and a finite slew rate. Therefore, both analog and digital systems are subject to limitations in resolution and bandwidth. In practice, as analog systems become more complex, effects such as non-linearity and noise ultimately degrade analog resolution to such extent that the performance of digital systems may surpass it. In analog systems, it is difficult to detect when such degradation occurs. However, in digital systems, degradation can not only be detected but corrected as well.
Source: Wikipedia (http://en.wikipedia.org/wiki/Analog_signal)
other great electronics sites:ee toolbox site
analog An analog or analogue signal is any time continuous signal where some time varying feature of the signal is a representation of some other time varying quantity. It differs from a digital signal in that small fluctuations in the signal are meaningful. Analog is usually thought of in an electrical context; however, mechanical, pneumatic, hydraulic, and other systems may also convey analog signals. An analog signal uses some property of the medium to convey the signal's information. For example, an aneroid barometer uses rotary position as the signal to convey pressure information. Electrically, the property most commonly used is voltage followed closely by frequency, current, and charge.
Any information may be conveyed by an analog signal; often such a signal is a measured response to changes in physical phenomena, such as sound, light, temperature, position, or pressure, and is achieved using a transducer.
For example, in sound recording, fluctuations in air pressure (that is to say, sound) strike the diaphragm of a microphone which causes corresponding fluctuations in a voltage or the current in an electric circuit. The voltage or the current is said to be an 'analog' of the sound.
Any measured analog signal must theoretically have noise and a finite slew rate. Therefore, both analog and digital systems are subject to limitations in resolution and bandwidth. In practice, as analog systems become more complex, effects such as non-linearity and noise ultimately degrade analog resolution to such extent that the performance of digital systems may surpass it. In analog systems, it is difficult to detect when such degradation occurs. However, in digital systems, degradation can not only be detected but corrected as well.
Source: Wikipedia (http://en.wikipedia.org/wiki/Analog_signal)
(Note: The Electronic Engineers Toolbox provides an alternative set of featured links for this word at http://www.cera2.com/analog.htm)
Explanation: these links are provided as part of our EE glossary project, which seeks to identify the most prominent keywords in embedded systems, embedded software, realtime and rtos, dsp (digital signal processing), system-on-a-chip, microprocessors and microcontrollers, and other constituent elements for embedded systems. While we seek to keep most of the links up-to-date, the user is refered to other primary electronic-based search sites such as: cera2.com, embedded.com, or EDN Magazine. If you have any suggestions of links or definitions, please email!
Mark Twain quote for the day:
If you pick up a starving dog and make him prosperous, he will not bite you. This is the principal difference between a dog and a man.
- Pudd'nhead Wilson